If NO IMAGES will be shown, use www.z80.eu/blog instead of blog.z80.eu

Please note also - THIS BLOG ENDS HERE WITH THE LAST ENTRY FROM NOVEMBER 9th 2021.

I have prepared a new blog with wordpress at https://vintagecomputing.info !!!

Thank you.

Very interesting:

There is not only the "KryoFlux" which is designed to "preserve" old disk formats.
Unfortunately there is still no possibility for all these with KryoFlux read disk images to write it back to the floppy disk...

There is also HxC Floppy Emulator to the rescue !
It's a small board with a PIC18F462, uses a SD card as a mass storage, and can be connected through an usual floppy drive cable (34 pin).
So the old machine can use this board like a normal (mechanical) floppy drive.
A picture of this miracle:


Also, they have something similar to the KryoFlux:
A small board with an Altera MAX CPLD EPM7128S, which in fact is able to emulate the floppy drive with the appropriate "firmware". This device can only read (so far).
This is what it looks like:

http://hxc2001.free.fr/floppy_drive_emulator/
This device is connected - very user friendly - with the help of USB.

Also, there is another (ready made) device available, but very expensive:
See for more infos at http://www.floppy-emulator.de/

100 years of IBM - that's worth to mention.

Without IBM, many inventions were missing, you can see a short overview at Youtube:
http://www.youtube.com/watch?v=39jtNUGgmd4
You can also see a longer film about IBMs last 100 years here:
http://www.youtube.com/watch?v=XrhDaAmn5Uw

There is also a famous TV spot shown in the Eighties, do you still remember their own version of Charlie Chaplin ?


It started all with two companies:
C-T-R Computer Tabulating Recording Company
and
Powers Accounting Machine Co.
in 1911.
Interesting, the company "IBM" (International Business Machines) was founded 13 years later, in 1924.

I issued an entry named "Looking for a real Fortran-66 compatible PC compiler ..." in four newsgroups:

https://groups.google.com/group/comp.os.cpm/browse_thread/thread/6004b19ad544d124 (comp.os.cpm)
http://groups.google.com/group/alt.folk ... 4eed64d776 (alt.folklore.computers)
http://groups.google.com/group/comp.com ... 62d3df55c1 (comp.compilers)
http://groups.google.com/group/de.alt.f ... c2d5?hl=de (de.alt.folklore.computer)

So far, I got over 100 answers (whow!).

So I extended my Fortran page meanwhile also a bit ;-)
See also http://www.z80.eu/for-compiler.html ...

My (former) dream machine:

Working with an Alpha 21164 64Bit CPU at 433MHz, it sounds not really amazing compared to current PCs (e.g. with an Phenom 6 core processor).
But it can run VMS. That's a very old operating system, well known for DEC-10, VAX or similar devices. But it's running also on Alpha based machine since years, and it's known for a high degree of security.
And, perhaps, the Digital Command Language (DCL) is one of the origins of CP/M and MS-DOS command processors.

At the moment, it's running Windows 2000 Beta 3 (for Alpha of course, not Intel), which is quite stable running. It can run also x86 code with the help of FX!32 (see related link).

To obtain VMS, you have to go to openvmshobbyist. At the moment I am waiting for more time, also because the license is limited and getting it without working with it sounds crazy.
Also, with a PWS 433a you have to add a SCSI CD-ROM and harddisk first, otherwise you can't run OpenVMS. May be I try OpenBSD first instead for that reason.

A very interesting link for Alpha users is also a blog - virtuallyfun.blogspot.com.

It was not easy.
I tried to use INTERLNK/INTERSVR several times, but it fails every time:
As you know, I set up a virtual machine with Windows 98 SE ... INTERSERVER was running.
But the connection between the two computer can't be established. May be it was not only related with the Nullmodem-cable but also with missing handshake signals. I don't know.

But I remembered my SRAM PCMCIA card which I used in my Amstrad NC100... I inserted a fresh lithium battery and then inserted the card into my Highscreen organizer.
I was able to format the "IC Card" (the memory card) and also was able to copy files onto it.

What a surprise when I plugged the card into my Notebook....
I had to search for a driver first.
I got one at the transcend website ( http://www.transcend.nl/support/dlcente ... _Win2k.exe ).
The drive itself was mounted, but the format of the media was not recognized.
So I had to use Cardware Software to get a raw image from the PCMCIA memory card.
A trial version can be downloaded at http://www.tssc.de/download/prods/cw2k.exe .

After having a raw image of the pcmcia SRAM card, I was able to use WinImage to read (and write) files from (or to) it.
I also inspected the boot sector of the image, yes it was FAT12:


It was not possible to read or write the card with Windows XP only.
May be it's related with FAT12. You can't even FORMAT FAT12 media via Windows XP.
Strange.

Ok, anyway, I managed to get 22NICE (1.42) to the Pocket PC, but also Turbo PASCAL 3.0 and BASIC for CP/M-80. With the 22NICE utility "GENCOM" I was able to generate appropriate loader .COM files for the CP/M-programs, so finally I was able to run CP/M-80 programs on the device.

And the speed is at least similar to a Kaypro IV, means enough for serious work.

BASIC-80 running on it:


Added later: There is also a Windows Vista/7 (trial) version of Cardware Software which can be downloaded at http://www.tssc.de/download/prods/cwvi.exe ...